SV-MicroPE 2k10 PlusPack CD/USB v.1.5

Posted by download in Software on 22-10-2010

SV-MicroPE 2k10 PlusPack CD/USB v.1.5



SV-MicroPE 2k10 PlusPack CD/USB v.1.5 | 345 MB

Miniature Windows-PE from the SV2004, heavily modified from its original version. Features - WIM-assembly, based on the core BS-Explorer, loaded for 30 seconds and running very quickly. There is support for SCSI / SATA / RAID.
System requirements: PC with 128Mb RAM or higher, CD / DVD drive or USB interface
Minimum Requirements: 128MB RAM, normal operation of all programs - 160MB.

Differences from the original version:
1. Integrated driver SCSI / SATA / RAID / IDE (@ yurkesha)
2. Full support USB-Flash/HDD hot-pluggable.
3. Support Wim-archives (automount in B: PePrograms), in the presence of a file ini - run. (@ Yurkesha)
4. Changed the logo download (for single and multi-various). CD-boot - Isolinus, USB-boot Syslinux (3.86). Can be installed on USB-HDD (format the partition, do the primary / active), copy the folder, run the batch file on the disk.
5. Added Russified Explorer
6. Restart the shell at startup when the carrier is connected with a marker. The marker is a batch file DISK SVPE startSV.bat. When you load goes bust drive C. .. W, sought the file, control passes to the first found, ie,
C: SVPE startSV.bat ... D: SVPE startSV.bat ...
The batch file installs a folder with the programs (PePrograms) as drive Y: - For simplicity, the "snap" connected with the support programs. In addition, the main menu is replaced by BS Explorer and restarts the shell. Ie, the main menu (the kernel) works, if not find a carrier with a marker. And extended (SVPE _start.ini, can be easily modified by a set of programs if necessary) replace the basic, if found support. Set of plug-programming can be seen on the last picture. In addition to the Start menu, easy to change the other menus, add entries to the registry and "throw" the necessary libraries in the core - all that can be prescribed in startSV.bat.
7. Kernel size 40MB that allows us to hope to boot with 128MB of RAM (not tested). All programs are removed from the kernel (only the file manager FAR, Eplorer and partially ERD-2005). For the convenience of using labels on some of the utilities are duplicated in different sections - for example, the program CD-Roller and IsoBuster (Recovery CD / DVD) "prescribed" under "Data Recovery" and "CD / DVD-utility."
8. The algorithm of memory allocation tempo drive (now in the presence of storage volume grows - up to gigabytes).
9. In detail: Runscanner for incitement programs to "lying" Windu, SetTargetRoot for the same purpose in the ERD-2005 and so on.
10. Virtually all programs can be used as a portable (self-extracting in TEMP with Auto Login). When you work in XPe from the menu on the possibility of being set against the "lying" Windu.

The list of programs in the assembly (v.1.5):
Show / Hide Text
7-Zip
7z Sfx-Split
Acronis Disk Director 11 Home
Acronis Disk Director Server
Acronis Disk Editor
Acronis Recovery Expert
Acronis TIB-browser
Acronis True Image Home 2011
Acronis True Image Server 9.7
Active @ File Recovery
Active @ Partition Recovery
Active @ Undelete
Aditor
Advanced Registry Tracer
Aida64 (Everest)
AlkelPad
AmoK DVD-Burner
Anti WPA 2.3
AntiAutorun 3.0
Antivirus AVZ
AnVir
ArId
ArtIcons Pro
Artweaver
Astra32
AutoIT au3-exe
AutoRen
Autoruns
AVSearch
Battery Eater Pro 2.3
Battery Indicator
Beyond Compare
BlueScreenView
Boot ICE
Captain Nemo
CCleaner by Piriform
CD-Roller
CheckUDisk
CloneSpy
CPU-Z
CPUBurn-in
CPUID HWMonitor
Current Process
Defraggler
Dependency Walker
DevMan View
DiskCryptor
Disk Editor & Data Recovery
Disk Smart View
DiskGenius
DisplayX
Double Driver
Driver Export
Easeus Data Recovery Wizard
Erunt
Ext2Mgr
FAR Manager 2.0
FCleaner
File Navigator
File Splitter
FileAlyzer
FlexHEX
Free OTFE
Freecell
Grub4Dos_GUI
Hard Disk Sentinel
HD-Speed
HDClone
HDHacker
HDScan
HDTune Pro 4.50
Hexprobe
Hijack This
HPUSBFW-2.2.3
HPUSBFW 2.0.6
HxD
ImDisk Virtual Disk
Inf2reg2hiv
Irfanview
IsoBuster
jv16 Power Tools 2010
KeyboardTest
LinX
LLF Tool
Lock Off
LSP Fix
MemTest
MonitorInfo View
MS Hearts
My Uninstaller
MyDefrag
Nero
Notepad 2
Notepad
O & O Disk Recovery
Opened Files View
Paragon Alignment Tool
Paragon HDM 2010 Pro
Partition Find and Mount
Partition Table Disk Doctor 3.5
Partition Wizard 5.0 Pro
PDF-viewer Sumatra
PDF-XChange Viewer
PE-Compact
PEXplorer
PhotoRec
PlanMaker 2010
PQ Drive Image 2002
Process Activity View
Process Services
Product Key Explorer
ProduKey
PSPad
Punto Switcher
Quick Killer
R-Drive Image
R-Studio 2.0
R-Studio 5.2
RamTester
RansomHide
Razblocker
Recover My Files 4.5
Recuva
Reg Organizer
RegFromApplication
RegScanner
RegShotUni
RegToScript
RegWorkshop
ResHacker
Restorator 2007
RightMark Memory Analyzer
Rname-It
RunTime DriveImage XML
Runtime RAID Reconstructor 4.01
S & M
Sateira DataBurner
Sateira ImageBurner
Sateira Session Commander
Scopin FileCopier
Search & Replace
Search My Files
Services PE
Servis TV Monitor Test
Shell Extention View
Smart Driver Backup
Soliter
Spider
Spy BHO Remover
Symantec Ghost CE 11.5.1
Symantec Ghost CE 8.2
Symantec Ghost Explorer
SysInfo for Windows (SiW)
SysInfo Viewer (SiV)
Testdisk
TextMaker 2010
TFT Test 1.52
Tireal TFT Test
Total Commander
Toucan
TransMac
Trojan Remover
Trojan Remover QuickScan
TrueCrypt
UFS Explorer
Ultimate Defrag
Ultra Defrag
Ultra Edit
UltraISO
uMBRGUI
Universal Extractor
Universal Virus Sniffer
Unknown Device Identifier
Unknown Devices
Unstoppable Copier
USBDeview
UsbIDCheck
UsefulUtils Discs Studio
Victoria 4.46
Virtual FDD
Vista & XP Tweaker
Vista UAC Maker
WinDirStat
Windows Miner
WinHex
WinImage
WinMount3
WinRAR
WinUha
XnView
XP-Key-Reader 2.7beta
XPlorer-2
Zero Assumption Recovery
Transducer measures Measure
Check Disk
Set the paging file


How to create a bootable CD / DVD or USB-Flash/USB-HDD:

1. For CD / DVD you need a program for recording images - for example, Nero Burning Rom. In order to burn the image without any problems, be sure to put a tick in the File-> Options-> Expert Properties-> Enable generation of short Lead-Out!, Otherwise it can not fit on a disc!
Rarely problems running the CD-ROM (error "Image checksum error, sorry.") On a very ancient Bios. If someone is, ask in PM, Ill give the patch to test another boot option (if the results are successful, will change the CD-boot).

2. For flash drives installation procedure is as follows:
2.1 USB flash drive, you must first format (Note: All data on the flash drive will be erased) using HP USB Disk Storage Format Tool. It is necessary to flash drive was seen as a computer The USB-HDD, from which you can boot the operating system. If the flash drive has been used as a boot, you can skip this paragraph.
2.2 Using WinRar, UltraISO or Total Commander to unpack the contents of an image on a flash drive / USB-HDD.
2.3 Go to the folder boot / syslinux on the flash drive and run makeboot.bat. This batch file will make the drive bootable. Please note that makeboot.bat need to run it from a flash drive (he defines on the drive letter).
Windows Vista and W7 to run a batch file need to be root! After working batch file your flash drive ready for use.

3. Installation on USB-HDD/HDD:
3.1. Screw you want to format any program on the breakdown of HDD, create a primary boot partition is the right size (730Mb - ...). File system must necessarily choose FAT32.
3.2 With the help of WinRar, UltraISO or Total Commander to unpack the contents of the image on the HDD.
3.3 Go to the folder boot / syslinux and run makeboot.bat (note that the screws are activated second pass batch file, read on the screen!). This batch file will make the drive bootable. Please note that makeboot.bat need to run it from CD (he defines on the drive letter).
Windows Vista and W7 to run a batch file need to be root! After working your batch file the screw was bootable (in the folder Syslinux create a boot file ldlinux.sys (attributes: hidden / system).

Possible errors:
"Syslinux.exe" is not an internal or external command, operable program or batch file. - Appears when you try to start the batch file under the x64 version of Windows. To correct castings need 32-bit version (Windows 2000/XP/2003/Vista/W7). Variant of the decision - made on another computer, or burn the image to a CD, boot from it and do everything from the LiveXP.

How to boot from this disk
To boot from the CD / DVD or USB-Flash/USB-HDD necessary when the computer boots from the boot menu to select the appropriate media. This can be done either in the BiOS, either in the menu Quick Boot / called at the time of initialization BiOS, usually on the keys Esc, F11, F12, F8 - see hint or instructions. USB-Flash is often in the Quick Boot hidden in a submenu HDD (bootable flash drive is perceived as a boot screw). If you have several options to boot from USB drive (USB-FDD, USB-ZipDrive, USB-HDD) - select USB-HDD.

How to add their programs to the menu
The programs themselves - throwing into folders PePrograms / folder PePrograms connected at boot as drive Y: /, appends, similar to the menu SVPE _start.ini (the easiest way to copy the next block, just change the path to your EXE shke, the path to bend, label). After loading the menu by default in the SV-MicroPE CD / USB 2k10 PlusPack replaced by a menu of folders SVPE _start.ini and restarts the shell with a new menu and program connections to disk Y: .
Would look like the point of a new program PROGA, triggered START.exe

----------
ParentItem = AntiVir antivirus folder on the menu
Caption = Proga program name
ExeName = Y: AntiVir PROGA START.exe path to the EXE shke
IconName = Y: AntiVir PROGA START.exe path to the icon, the same as for EXE shke
IconNumber = 0 number will
ExeDir = Y: AntiVir PROGA Program folder
CmdParam =- ai1 if you need a start parameter (otherwise - is empty)
ShowState = NORMAL run non-dot (if you run the CMD-file, beauty set HIDE)
----------

Changes in v.1.5:
Added new windows-versions: Acronis True Image Home 2011.5519 (eng), Acronis Disk Director 11 Home 11.0.216 (rus), TIB-browser (based on the A43) to view images akronisovskih, HDClone 3.9.2 (eng), Paragon HDM 2010 upgraded to Virtual Server (rus), Disk Cryptor (eng), Aida64 (formerly known as Everest). Also in the boot menu added DOS-version of HDClone and HDAT2.
For the "suspension" of programs in a conventional windsurfing P2Start.exe run the file in the root directory, it is connected to the program in your Start Menu or by section, if you disable disk / exit P2Start.exe they are unmounted. For the safety of "dangerous" programs (Acronis, ...) in this menu is not included. And remember, this is not portable version, and if you have the same installed program, it is better to use it.

Download:

Code:

http://www.filesonic.com/file/26416569/SVMi.part1.rar
http://www.filesonic.com/file/26416571/SVMi.part2.rar
http://www.filesonic.com/file/26416573/SVMi.part3.rar
http://www.filesonic.com/file/26416575/SVMi.part4.rar

Comments are closed.